Skip to content
BethanyLocksmith Specialists
Open 24/7(249) 490-5984Open 24/7
Person holding a black door-handle assembly and a latch beside a glazed door with exposed lock openings. — Smart Lock Installation, Kawartha Lakes
Two detached brass lock cylinders and four house keys on a wooden counter. — Lock Rekeying, Kawartha Lakes

Change or rekey · Kawartha Lakes

Smart Lock Installation

Your mother still lives on her own, and the personal support worker, the pharmacy delivery and two siblings all need to get in on different days.

Call (249) 490-5984

In plain words

For a landlord, a host or anyone who shares a door with people who come and go, the appeal is control without key cutting. Each tenant, guest, cleaner or contractor gets a code of their own, with a start and end date where the model allows, and removing someone takes seconds instead of a trip across town. The installation includes setting up that structure: an owner account, a small register of who holds what, and a routine for retiring codes at turnover. In a rented home the change is agreed with the tenant or landlord first, since both sides need a working way in.

Sound familiar?

Arthritis has made the small house key hard to grip and turn, especially with gloves on in January. Pressing a few buttons, or tapping a fob against the lock, would make coming home in winter far easier.

How the visit goes

Smart Lock Installation

How the visit goes

Ceramic dish holding keys on a wooden table beside a leafy vase, with a black door, deadbolt and knob behind.
Technician fitting a steel door knob into a door beside a deadbolt, with an open tool bag of screwdrivers nearby.
  1. Will the bolt travel on its own?

    The most important test takes moments and uses no tools. With the door closed and nobody touching it, the locksmith turns the existing thumb-turn with two fingers and feels whether the bolt glides into the strike or has to be forced. A motor has less strength than a hand, so any drag here is drag the smart lock will fight every day until its batteries give out. Hinges that have let the door drop, a strike pocket that is shallow or off-centre, and weatherstrip that pushes the door out of square are the usual culprits, and each is something the locksmith can correct before the new hardware goes on.

  2. Retrofit locks that keep your outside hardware

    Some smart locks mount only on the inside of the door and turn the deadbolt you already own, leaving the exterior face and the keyway as they were. Fitting one begins by checking that the existing deadbolt is on the model's compatibility list and that its tailpiece shape matches an adapter in the box. The interior thumb-turn is removed, the adapter fitted, and the motor unit clamped to the mounting plate so it sits square and turns the bolt through its full travel without slipping. Because the outside is untouched, these suit rented units where the landlord prefers the door unchanged, and older doors whose exterior hardware is worth keeping. The existing key keeps working alongside the phone.

  3. Codes you can give and take back

    The lock now belongs to your account, and the day-to-day control is yours. Adding a code for a new cleaner, setting a weekend window for a visiting relative or removing the dog walker who moved away is done from the app or the keypad in moments, without a locksmith and without cutting anything. A short list of who holds which code, kept somewhere private, is worth writing on day one so the door's access stays as tidy as it is today. Codes should be unique per person and never shared aloud on the step; where the lock offers one-time or scheduled codes, use them for trades and deliveries and let them expire.

Smart Lock Installation

In the van

  • Thick-door extension kit

  • Hole saw, spade bit and drilling jig

  • Door-position sensor magnet

  • Manufacturer-specified batteries

  • Dry PTFE lubricant

Hands fitting a steel door knob into the bore of a dark door, with a yellow drill and tool bag behind.

Smart Lock Installation

What affects the quote

  1. Taking over an existing smart lock

    Resetting, re-enrolling and cleaning the permissions on a lock that came with the property is a different job from fitting new hardware: less cutting, more account work, and it is quoted on its own footing.

  2. Removing an old mortise or non-standard lock

    Older doors sometimes carry a mortise case or a lock with an unusual footprint. Filling the pocket, plugging holes and re-drilling to the standard preparation is careful joinery, and it is quoted as preparation.

  3. Finish and matching hardware

    Standard finishes are the base. A less common finish, or replacing the knob or lever at the same time so the door matches, adds to the hardware portion of the quote.

What to have ready

  • How many people need their own way in, and does that list change often?
  • Do you want codes only, phone control, alerts, or all three?
  • Is there a storm door in front of it?
Call (249) 490-5984

Smart Lock Installation: questions

Questions
What information should I have ready when I call?

The door's material and rough thickness, what lock is on it now and whether it is a separate deadbolt above a knob or lever, and whether there is a storm door. Say what you want the lock to do: codes only, phone control, alerts, auto-lock. Mention how the Wi-Fi is at the front door if you know, whether you rent or own, and how many people need their own way in. A photo of the inside and outside of the existing lock is a real help.

Can the lock be set to lock itself?

Most models offer auto-lock, and it is one of the settings the locksmith configures with you. You choose the delay, from a few seconds to several minutes, and the lock throws the bolt on its own once the door has been closed that long. Models with a door sensor wait until the door is actually shut, which avoids the bolt extending into thin air. Families who have ever wondered whether the back door got locked tend to value this most.

The house came with a smart lock. Can you make it mine?

Yes, and it is treated as a fresh installation rather than a hand-me-down. The lock is reset to factory settings using the maker's procedure, which wipes codes, schedules and paired phones, then enrolled to an account you create. Anything else that could open it, such as a hub or a voice assistant, gets its own check, because those permissions sit outside the lock. The override cylinder is rekeyed, batteries replaced and firmware updated. If the hardware is worn, replacing it is the cleaner choice.

Related services

Smart Lock Installation near you

Call(249) 490-5984

Request a visit

Or call (249) 490-5984 · open 24/7